Cone Compression Tester

$0.00

Cone Compression Tester or Cone Collapsing Strength Tester is used to test the collapsing strength (CS) or crushing force of a Paper Cone.

Cones are used to wind textile yarn. The winding tension of the yarn creates a squeezing / crushing force acting radially inwards on the cone.

Poor quality cones, collapse inwards under this stress.

Confirms to : Proprietary Test Methods

Download PDF Catalog - PackTest

Description

Cone Collapsing Strength Tester / Cone Compression Tester

This is an equipment which can test the collapsing strength (CS) or crushing force of a Paper Cone.

Models Available:

Model Number P300D / P300DDX
Type Pneumatic
Power Source Compressed Air
Confirms to Proprietary Test Methods
Test Principle : Constant Rate of Load Increment
Capacity 300 Kgf
600 Lbf
3000 N
Normal Working Range

(10-90% of capacity)

30-270 Kgf
60-540 Lbf
300 – 2700 N
Max Working Range

(5-100% of capacity)

15-300 Kgf
30-600 Lbf
150 – 3000 N
Resolution / Leastcount 0.5 Kgf
1 Lbf
5 N
Accuracy (0.2% of capacity) 0.6 Kgf
1.2 Lbf
6 N
Cone Sizes 3 Deg 30 Min / 4 Deg 20 Min / 5 Deg 57 Min
Software Optional.
Models with software end with DX
Utilities Required
Compressed Air
@ 6 bar (85 psi)
Yes
Electricity : 220 / 110 Volts AC at 50/60 Hz
Desktop / Laptop PC
(Core I3 + 4 GB RAM + Win10, or higher)
Required for models ending with DX

 

Additional information

Model

Pneumatic, Mechanical

Capacity

300 Kgf – 6000 Lbf – 3000 N

Software

With Software, Without Software

You may also like…